We are located in the Central Florida area and do design and limited manufacturing in the electronic field. We supply the type of equipment that is not available over the counter. Our design work includes both digital and analog. If you have a special circuit need, please feel free to contact us about it.
We can do the design, first article, and complete documentation. At our main facility, we have over 2400 square feet of floor space. In addition to our main facility we have about 1000 square feet that is split between two locations where most of the R&D; is done. All three locations have electronic test equipment as well as mechanical equipment for performing the work that is required for a given task.
We can do the design, first article, and complete documentation. At our main facility, we have over 2400 square feet of floor space. In addition to our main facility we have about 1000 square feet that is split between two locations where most of the R&D; is done. All three locations have electronic test equipment as well as mechanical equipment for performing the work that is required for a given task.
Services
We do design engineering in both the analogue and digital fields. We have designed such things as; Tire Pressure Monitors, Safety Antennas, Control Circuits for lamps, Field Tester for testing equipment in the field, Light Engines for fiber optics, Pulse Width Modulation (PWM) circuits for control lights, Traffic Control equipment, etc.
When a customer comes to us with a particular need of a unit or system to perform a given task. We will advise the customer if it is already available over-the-counter (to the best of our knowledge). If it is not available over-the-counter, then we can decuss what it would cost in order to design and build the first article.
The filament Chase Lights are made in the desired length that fits the customers needs. The lamps are spaced approximately 1 apart. The lamps are normally wired for a 4 circuit chase operation. Each lamp draws 40 ma of current at 6 volts. The lamps are installed in a 3/8 Flexible Tube and the ends of the tube are sealed with hot glue to prevent moisture penetration.
Reviews
Be the first to review Bill Davis Engineering.
Write a Review
