We are passionate about providing excellent customer service and helping our customers in every way possible. Our personable team is honest, friendly, and dedicated to providing only the best customer care and product support. We are manufacturers of waterproofing, roofing, and wall restoration products and are converters of polyester reinforcing fabrics for the roofing industry.
If you are in the market for coatings for low slope roofing, wall repair, or roofing fabrics, trust Specification Chemicals, Inc.
If you are in the market for coatings for low slope roofing, wall repair, or roofing fabrics, trust Specification Chemicals, Inc.
Services
The Nu-wal system consists of our 2500 Nu-wal Saturant and WC-14 fiberglass matting to stabilize your cracking walls and encapsulate old lead paint to keep everyone safe. Our line of White Plastic Coatings used with our 100% polyester fabrics are made to not wither in the sun and keep you dry for years to come.
Nu-Wal is a quick and efficient system for repairing damaged plaster walls and ceilings. The #2500 coating and fiberglass mat reinforce the entire surface with a fine-textured fiberglass mat embedded in an elastomeric adhesive. This creates a surface that resists impacts and abrasions. Cracks in exterior or interior surfaces do not come back as they do with patching compounds.
Plaster is hand trowelled when it is applied. This makes it difficult to have perfectly straight lines at both inside and outside corners. When starting or ending at either an inside or outside corner it is necessary to "wrap around" inside corners (about 1 inch) and cut the fiberglass at the center of the turn.
Pol-E-Scrim Roofing System is used on roof surfaces of plywood, oriented strand board (OSB), cured concrete, or Dens Deck roof board. This system requires a fairly smooth substrate. Also, keep in mind that the temperature and humidity affect the curing time. Do not apply the Pol-E-Scrim, Vap-R-Lok or White Plastic at temperatures below 50F, or if the temperature will fall below 40F within 24 hours.
Surface is to be sound, dry, smooth, and clean (free of dirt, oil, grease, asphalt that is not cured dry or any contaminant that would adversely affect adhesion), free of blisters and depressions and properly sloped to drains and eaves. Cants and tapered edges are to be sound and preformed to a 45 angle.
Reviews
Be the first to review Specification Chemicals Paint.
Write a Review
