Clean Touch Pool Service

Maintaining a clean, safe, and healthy pool can be difficult. Especially in Texas, with all the sun and high temperatures your pool faces everyday. The more usage your pool gets, as well as sun screen, leaves and debris, the more difficult it is to properly balance your pools chemistry. Let us take the guesswork out of your pool maintenance by keeping it cleaned and sanitized with our weekly pool service!

Healthier and easier to balance pool water - We typically remove 10-20 lbs of dirt and grime from the filter. That dirt and grime will no longer be a part of the pool circulatory system. This will also lessen algae outbreaks. Lower electric bill - After a dirty filter has been cleaned, the average pressure drop will be 5-10psi.

An acid wash is the stripping of a thin layer of plaster, exposing fresh plaster beneath. Therefore, it is not recommended to do it annually, which will accelerate the need for re-plastering. Most plaster coats are in excess of 1/2, so a careful acid wash every 5 years won't hurt.

A general rule of thumb for determining if your pool needs an acid wash: If you can see the bottom of the shallow end floor, you can probably bring it back with chemicals, cleaning, and filtering.If the floor is not visible, the cost of the chemicals and labor may exceed the acid wash charge, and take much longer.

Pools are meant for long summer afternoons, daily exercise dips, and epic summer parties. So when your pool suddenly acts up, don't let that be the end of your pool's summer season. Turn to Clean Touch Pool Service for comprehensive pool repair throughout Arlington, TX. We can quickly diagnose pump and filter issues.