Operating out of Seattle since early 2011, Petrel Marine can provide fault-finding, repair and installation services on a wide array of marine electrical and electronic systems found onboard vessels in the Puget Sound area. We are committed to conducting this work to the highest level of quality and accepted industry standards such as those set by by the American Boat & Yacht Council (ABYC) and the National Marine Electronics Association (NMEA).
Based in Seattle but operating throughout Puget Sound, Petrel Marine is insured and licensed to conduct business in many marinas. We operate primarily within Seattle but travel to and frequently service locations further away. For customers located on the west side of Puget Sound we typically require delivery of the vessel to a closer Marina's Guest Moorage if possible.
Based in Seattle but operating throughout Puget Sound, Petrel Marine is insured and licensed to conduct business in many marinas. We operate primarily within Seattle but travel to and frequently service locations further away. For customers located on the west side of Puget Sound we typically require delivery of the vessel to a closer Marina's Guest Moorage if possible.
Services
Below are a couple of examples of recent work completed by Petrel Marine involving the upgrade of DC & AC distribution systems. They were designed to improve the owners and captains experience, equipment performance whilst adhering to the safety standards laid out by the ABYC.
Petrel Marine can also provide fault-finding support in these areas and has experience with manufacturers such as Magnum, Xantrex, ProMariner, Balmar, BlueSea Systems, B.E.P to name a few.This system was installed onboard a 43' Nauticat Ketch to add much needed protection and better control.
Petrel Marine can also provide fault-finding support in these areas and has experience with manufacturers such as Magnum, Xantrex, ProMariner, Balmar, BlueSea Systems, B.E.P to name a few.This system was installed onboard a 43' Nauticat Ketch to add much needed protection and better control.
Installation of Maretron DCM100 module. Just one example of the many modules that Maretron manufacture that we have experience installing and configuring. These include the AC Power, Temperature, Fluid Pressure and SMS Module. Second monitoring station installed in the Wheelhouse of an Ocean Alexander 54' to view the Northern Lights Generator vitals.
Having experience with the a number of marine navigation electronics manufacturers such as Raymarine, Garmin, Simrad, Lowance, Comnav and Furuno. Petrel Marine can advise on, install, commission or fault-find many of their devices such as Multi Function Displays, Open & Enclosed Arrays, Autopilots and Weather Monitoring.
Reviews (2)
Geoff H.
May 22, 2016
Report
Matt completed a number of minor electrical projects on my 2007 36' SeaRay last week and I plan to have him back soon for a few more upgrades to the system. He thoroughly tested the batteries and determined that only 1/4 was still functioning within acceptable parameters. He then not only offered me a number of different options for replacement/upgrade of the existing batteries, but also educated me pretty thoroughly on the relative benefits and drawbacks of each option. In addition to replacing the old lead acid batteries to AGMs, he also installed a new 40 amp charger (the old one was 20
Rhonda P.
Nov 01, 2013
Report
Matt Netting of Petrel Marine performed several repairs on our Valiant 40 sailboat moored out at Quartermaster Marina on Vashon Is. Matt was able to pinpoint a major grounding issue with the Magnum power inverter as well as correcting a list of electrical hazards noted on our recent survey.
Matt also installed/wired-in a new iMux from Brookstone, Horizon Matrix AIS 2150 VHF & our existing Garmin GPS to be used for delivering wifi connectivity to our iPad. The entire nav station was a rat's nest of "home made" variety that Matt had to sort out & correct. His work is impeccable
Matt also installed/wired-in a new iMux from Brookstone, Horizon Matrix AIS 2150 VHF & our existing Garmin GPS to be used for delivering wifi connectivity to our iPad. The entire nav station was a rat's nest of "home made" variety that Matt had to sort out & correct. His work is impeccable
